(1) The Secretary shall, within 30 months after October 24, 1992, prescribe testing requirements for those high-intensity discharge lamps and distribution transformers for which the Secretary makes a determination that energy conservation standards would be technologically feasible and economically justified, and would result in significant energy savings.
(2) The Secretary shall, within 18 months after the date on which testing requirements are prescribed by the Secretary pursuant to paragraph (1), prescribe, by rule, energy conservation standards for those high-intensity discharge lamps and distribution transformers for which the Secretary prescribed testing requirements under paragraph (1).
(3) Any standard prescribed under paragraph (2) with respect to high-intensity discharge lamps shall apply to such lamps manufactured 36 months after the date such rule is published.
(1) The Secretary shall, within 30 months after October 24, 1992, prescribe testing requirements for those small electric motors for which the Secretary makes a determination that energy conservation standards would be technologically feasible and economically justified, and would result in significant energy savings.
(2) The Secretary shall, within 18 months after the date on which testing requirements are prescribed by the Secretary pursuant to paragraph (1), prescribe, by rule, energy conservation standards for those small electric motors for which the Secretary prescribed testing requirements under paragraph (1).
(3) Any standard prescribed under paragraph (2) shall apply to small electric motors manufactured 60 months after the date such rule is published or, in the case of small electric motors which require listing or certification by a nationally recognized testing laboratory, 84 months after such date. Such standards shall not apply to any small electric motor which is a component of a covered product under section 6292(a) of this title or a covered equipment under section 6311 of this title.
In establishing any standard under this section, the Secretary shall take into consideration the criteria contained in section 6295(n) of this title.
The Secretary shall, within six months after the date on which energy conservation standards are prescribed by the Secretary for high-intensity discharge lamps and distribution transformers pursuant to subsection (a)(2) and small electric motors pursuant to subsection (b)(2), prescribe labeling requirements for such lamps, transformers, and small electric motors.
Beginning on the date which occurs six months after the date on which a labeling rule is prescribed for a product under subsection (d), each manufacturer of a product to which such a rule applies shall provide a label which meets, and is displayed in accordance with, the requirements of such rule.
(1) After the date on which a manufacturer must provide a label for a product pursuant to subsection (e)—
(A) each such product shall be considered, for purposes of paragraphs (1) and (2) of section 6302(a) of this title, a new covered product to which a rule under section 6294 of this title applies; and
(B) it shall be unlawful for any manufacturer or private labeler to distribute in commerce any new product for which an energy conservation standard is prescribed under subsection (a)(2) or (b)(2) which is not in conformity with the applicable energy conservation standard.
(2) For purposes of section 6303(a) of this title, paragraph (1) of this subsection shall be considered to be a part of section 6302 of this title.
(Pub. L. 94–163, title III, §346, as added Pub. L. 95–619, title IV, §441(a), Nov. 9, 1978, 92 Stat. 3272; amended Pub. L. 102–486, title I, §124(a), Oct. 24, 1992, 106 Stat. 2832.)
1992—Pub. L. 102–486 amended section generally, substituting provisions requiring energy conservation standards for high-intensity discharge lamps, distribution transformers, and small electric motors, for provisions authorizing appropriations for fiscal years 1978 and 1979.
Pub. L. 116–260, div. Z, title I, §1006, Dec. 27, 2020, 134 Stat. 2432, provided that:
"(a)
"(1)
"(2)
"(A) does not meet or exceed the applicable energy conservation standards described in paragraph (1); and
"(B)(i) was manufactured between January 1, 1987, and December 31, 2008, for a transformer with an equal number of phases and capacity as a transformer described in the table in subsection (b)(2) of section 431.196 of title 10, Code of Federal Regulations (as in effect on the date of enactment of this Act); or
"(ii) was manufactured between January 1, 1992, and December 31, 2011, for a transformer with an equal number of phases and capacity as a transformer described in the table in paragraph (1) or (2) of subsection (c) of that section (as in effect on the date of enactment of this Act).
"(3)
"(b)
"(c)
"(1) that the entity purchased a qualified energy efficient transformer;
"(2) of the core loss value of the qualified energy efficient transformer;
"(3) of the age of the qualified energy inefficient transformer being replaced;
"(4) of the core loss value of the qualified energy inefficient transformer being replaced—
"(A) as measured by a qualified professional or verified by the equipment manufacturer, as applicable; or
"(B) for transformers described in subsection (a)(2)(B)(i), as selected from a table of default values as determined by the Secretary in consultation with applicable industry; and
"(5) that the qualified energy inefficient transformer has been permanently decommissioned and scrapped.
"(d)
"(1) for a 3-phase or single-phase transformer with a capacity of not less than 10 and not greater than 2,500 kilovolt-amperes, twice the amount equal to the difference in Watts between the core loss value (as measured in accordance with paragraphs (2) and (4) of subsection (c)) of—
"(A) the qualified energy inefficient transformer; and
"(B) the qualified energy efficient transformer; or
"(2) for a transformer described in subsection (a)(2)(B)(i), the amount determined using a table of default rebate values by rated transformer output, as measured in kilovolt-amperes, as determined by the Secretary in consultation with applicable industry.
"(e)
"(f)
Pub. L. 102–486, title I, §124(c), Oct. 24, 1992, 106 Stat. 2833, directed the Secretary to evaluate the practicability, cost-effectiveness, and potential energy savings of replacing or upgrading utility distribution transformers during routine maintenance and, not later than 18 months after Oct. 24, 1992, report the findings of the evaluation to Congress with recommendations.